How to Make Your Own Flash Light

In the electronics market, one stock that is available is flashlight. Today, there are various types of this expedient sold. You can pick from the incandescent ones to the Led flashlights.

The Led lights are more advanced flashlights. This creates brighter and more luminous lights that are perfect for lighting pitch black areas while the night. However, this can cost an arm and a leg. If you want to make your own flashlight, here are the steps you can follow:

Step 1: Make sure you have all the materials ready. This is a miniature scheme wherein you can use recyclable materials. Get a slightly thin cardboard and roll it so you can make a tube. Better yet, get the cardboard tube of a toilet paper. Also get some duct tape, copper wire that is about 5 inches in length, light bulb (make sure you pick the one that is appealing adequate for you and 2 D batteries.

Step 2: Get the wire and snip the conductor off to impart the copper inside. Use a small piece of duct tape and join together it to the negative end of one D battery.

Step 3: Get the tube and cut it to the desired length. This will serve as the distance of the flashlight. You wrap the outside part of the tube with an appealing paper but make sure you leave one end of the tube open.

Step 4: Now you can place the battery with the wire. Place the negative end with the wire to the covered end of the tube. A part of the wire should be seated by the battery and direct the rest of the wire at the open part of the tube. Afterwards, you can place the second battery on top of the first one. Put negative side down first so it can join together to the confident end of the first battery related to the wire.

Step 5: Use the duct tape to attach the bulb at the top of the battery. Tape it just adequate for it to stick to the battery. Make sure the silver part of the battery is still exposed so you can stick one end of the wire to it.

Step 6: Now you can light the bulb. Stick the other end of the wire to the silver part of the lowest of the bulb. This is now the switch to your flashlight. If you want to turn it off, you can remove the wire from the silver part of the bulb.

Flashlight flashlight led

Thanks To : Cheap jewel jewelry